Although the science behind it is not at all new, hydronic radiant floor heating is getting more popular these days. The need for additional or a more stable source of heat is of utmost importance especially during the colder days and the winter season.



Trying on alternative methods such as hydronic radiant heat would also pose safety not only on your own family but also on your neighbors. As these units are installed as part of your flooring, you will not have to worry about possible fire spread compared when you are using an oil or kerosene furnace.



It will also help eliminate the use of less-environmentally friendly heat sources such as those units that require natural gas or propane to flow into various pipes. As the wirings are stationed below the flooring of your house, you will never have to worry about your kids stepping on or playing with those highly sensitive and extremely dangerous tubes or wirings.

More and more people are investing in this form of heating system due also to its efficiency and the fact that it can heat the whole house by itself. No more need for an extra heating unit to be installed in every corner. The warmness of the flooring is sure to escalate and touch the ceiling of your home. And since it only uses water, you will never have to worry about possible dangers. There is not much need for maintenance for it is quite safe to use.

The use of this technology is said to be the best there is today mainly because of two surfacing reasons: relatively cheap installation costs and the long-term maintenance cost of the unit. Once installed in a still constructed house or building, the same heating system is sure to help reduce your bills compared to when you are using electric heating and this is brought about by the feature of the system to efficiently transfer heat from a water source to the flooring of the house.

The foundation of a hydronic radiant floor heating system contains aluminum (or cement) flooring underneath the wood or tile paneling of your house. Water is first boiled and pumped through polyethylene PEX tubing which is embedded in the aluminum foundation. The heat travels from a wood, oil, or electric boiler and sends heat through the piping. The aluminum heats, using convection to heat up the floor and move warm air upward into your living space.

There are numerous advantages to this form of heating: firstly, with conventional heating systems, the heated air must travel through vents, thence moving in a scattered fashion throughout the house. The heating efficiency of these systems is, in comparison, much less than hydronic radiant heating because of the nature of heat. The heat in your home constant rises as cooler air replaces it near the floor. The idea behind these hydronic systems complements the relationship between warm and cool air. The heat will still rise toward the ceiling, but the ground will remain consistently warm. Secondly, since the heat will be coming directly from the PEX tubing underneath your floor, it will not disturb dust mites or allergens that cause allergic reactions, sneezing and respiratory infections.

However, in order to install a hydronic radiant floor heating system, you (or a contractor) must remove the current flooring from your home. Most hydronic radiant floor heating systems are designed with an intention of heating your entire house, which will require a boiler that has enough power to heat your entire floor space. These boilers are becoming less expensive and more efficient with recent developments in polyethylene tubing, which only came to the U.S. in the 1980s. Also, if you decide to invest in alternative energy sources such as geothermal or solar, the projected return on your investment is steadily increasing. If you are not ready to invest into hydronic radiant heat and this amount of time into redesigning your house's entire heating system, you might consider Electric Radiant heat, because it is designed for smaller spaces.

Most often, the cold feeling we experience is not due to merely to cold temperatures, but to dramatic fluctuations in temperature. Conventional heating systems tend to move air around too rapidly, causing the warm air to rise to the ceiling, while the cool air moves toward the floor. This causes temperature pockets to form. Thus you may feel warm near the center of a room, but feel cold near a door. Floor heating systems keep a consistent temperature, generally causing you to feel warmer all the time.

If you are interested in redeveloping your existing home heating system, hydronic radiant floor heating can be a great alternative to a conventional furnace to vent system. If you have the desire and capacity to learn about the installation process, there are some very informative, "do it yourself" (DIY) groups that can help to educate you on proper designs and materials. The most important aspect will be how precise the PEX measurements and cuts are. Do your job well and your hydronic radiant floor heat system will be keeping you warm and cozy for years to come.